Technical FAQs

Ask a Question

Connecting an EGX150 to a serial RS485

Issue
The Serial port for the EGX150 uses an RJ45 connector, which is different from the standard RS-485 connector.

Product Line
Link150
EGX150

Resolution
 
Pin Number Colour Signal name Description
1 Orange/White striped Rx- Receive Data -
2 Orange Rx+ Receive Data +
3   NC No Connection
4 Blue Tx+ Transmit Data +
5 Blue/white striped Tx- Transmit Data -
6   NC No Connection
7   NC No connection
8   GND Ground











Connect, using a straight through RJ45 cable to the RS-485 port on your EGX150.

Cut the other end (that is to be connected to your slave device) to expose the wires.

2-Wire RS-485 connection:

Use the Blue wire as the positive (+) and the Blue/White striped wire as the negative (-)


4-Wire RS-485 connection:
 
RJ45 Pin Number  Master Slave
1 Rx- Tx-
2 Rx+ Tx+
4 Tx+ Rx+
5 Tx- Rx-









Kindly refer to the EGX150 User Guide for details on how to wire the RS-485 port.
Was this helpful?
What can we do to improve the information ?