Technical FAQs

Ask a Question

Accusine PCS+ Dual operation mode

Issue
The Accusine+ can be used as a harmonic filter and power factor correction/Load balancing simultaneously. The total output current will be limited by harmonic current and the reactivar current. 

product Line
Accusine PCS+

Resolution 

The total output of the harmonic filter in dual mode is governed by the following formula:


When the total current output of the active filter required exceeds the unit rating, the Accusine PCS+ has a harmonic priority setting to determine which mode has priority.

Use percentage of harmonic priority to set output current split
  • 100% means output capacity utilized for harmonic correction, then left over can be used for Power factor correction.
  • 0% assigns fundamental (PF correction) current as the primary mode, left over used for harmonic correction.
The table below describes the relationship between harmonic current the reactive current



 
Was this helpful?
What can we do to improve the information ?