Technical FAQs

Ask a Question

Cannot make output registers of a Modbus Master Device Module available for OPC via ION Enterprise

The output registers of a Modbus Master Device Module contain the imported Modbus data for other ION modules to use. The output labels are derived from other registers as shown below:
<label><bit number>@<slave name>[value]

The label is acquired from the Modbus Master Map modules Device Map register (The bit number applies to Packed Boolean formats only).

ION Enterprise has a known issue with the use of @ symbol in OPC registers, which by default exists in the outputs of the Modbus Master Device Module. Hence, these registers cannot be made available for OPC directly from the Modbus Master Device Module. An alternative solution can be the use of a "dummy" arithmetic module in the meter or the VIP.

  • Date Created: October 6, 2008
    Last Revised: February 23, 2009
    Original Author: KG
    All content © 1992-2009 Schneider Electric

Legacy KB System (APS) Data: RESL197880 V1.0, Originally authored by KBAdPM on 02/24/2009, Last Edited by KBAdPM on 02/24/2009
Related ranges: ION Enterprise V5.5, ION Enterprise V5.6
Was this helpful?
What can we do to improve the information ?