Technical FAQs

Ask a Question

How can I setup Vijeo Citect to communicate to a controller via Modbus Plus using the TSXCUSBMBP adapter?

 

This documents explains the steps involved in configuring Vijeo Citect to communicate to a controller via Modbus Plus protocol.

This procedure uses the Vijeo Citect MBPLUS Driver.

1) Configure the I/O Server, Boards, Ports and I/O Devices as shown below:

 

2) Testing with a Quantum / Unity Controller which requires to select the MBPLUS20 Protocol.

Attachments

3) Install the latest version of the MBPLUS driver.  Note: you will need to install the latest version of the Modbus Plus MBx driver.
 


Was this helpful?
What can we do to improve the information ?