Technical FAQs

Ask a Question

Where to configure communications to an ADVC controller in WSOS5?

The communications must be configured to communicate to an ADVC controller. This menu is located: Customize > WSOS communications > Select the communications protocol/method (Typically Direct) and configure the parameters accordingly. In most cases Direct will be used and the only parameter that must be configured is the Comms Channel. The Comms Channel is the communications port used on the PC, this may be verified using the Device manager built within Windows.

Legacy KB System (APS) Data: RESL212731 V1.0, Originally authored by DaFr on 10/11/2013, Last Edited by DaFr on 10/11/2013
Related ranges: Others protection relays

Was this helpful?
What can we do to improve the information ?