Technical FAQs

Ask a Question

How do I perform basic programming on an ATV21 or ATV212 with VIA or VIB as speed reference?

Issue: 
How do I perform basic programming on an ATV21 or ATV212 with VIA or VIB as speed reference? 

Product line:
Altivar ATV21 / ATV212

Environment:
All models, all serial numbers
 
Cause:
Basic Programming for the ATV21 drive.  
 
Resolution:
Cn0d = 0-Logic In
Fn0d=1 for VIA, or 2 for VIB

 - AU1 = 0
 - ACC (Accel Ramp time in seconds)
 - DEC (Decel Ramp in seconds)
 - UL = High Speed (=60Hz)
 - LL = Low Speed (what drive will run if not adjusted)
 - uLu = Motor Rated Voltage
 - tHr = Motor Current or FLA
 - F415 Motor Nameplate FLA
 - F417 Motor Nameplate RPM
 - F601 to Service Factor Amps per Motor Nameplate


You can download the ATV21 Programming Manual here:
https://www.schneider-electric.co.id/en/download/document/AAV75193/
Was this helpful?
What can we do to improve the information ?