Technical FAQs

Ask a Question

Video: Where can I find basic programming for the ATS22?

Issue:
Where can I find basic programming for the ATS22?

Product Line:
Altistart 22 Soft Start

Environment:
All models and serial numbers

Resolution:

Basic Programming:

Conf Menu
Uln = line voltage
In= motor rated current (motor FLA) 
LAC= Advanced mode

Set Menu
t90= Initial voltage
ILt= current limit (max current the motor will be allowed to pull)
ACC= Acceleration time (user preference per application requirements)
DEC= Deceleration time (user preference per application requirements)
tHP= Motor thermal protection (10,20,30)  Note: To activate tHP, set ItH to ErUn or On

Pro Menu
ItH= Overload protection (oFF / ErUn / On)

The following video walks the user through basic configuration of the ATS22

 

The basic programming parameters to set up an ATS22 Soft Start can also be found in the User Manual, bulletin number BBV51330. See below link or attachment for a copy of the User Manual.
https://www.schneider-electric.com/en/download/document/BBV51330/
 
Was this helpful?
What can we do to improve the information ?