Technical FAQs

Ask a Question

What will cause enclose units not to run the motor in AFC or in Bypass?

What will cause enclosed units not to run the motor in AFC or in Bypass?
 
Issue:
What will cause enclosed units not to run the motor in AFC or in Bypass?
 
 Product Line:
SFLEX, EFLEX, MFLEX, CPD, MCC, Field Drive, Econoflex, 58M

Environment :
All Enclosed products with Bypass

Cause:
The motor will not run in AFC or in Bypass
 
Resolution :
1).  Check supply fuse primary side of transformer.
2).  Check fuse on the secondary side of the transformer
3).  Verify the overload is not tripped, (trip and then reset)
4).  Verify the AFC/OFF/Bypass switch is getting voltage
5).  With factory drawing in hand check the HOA and the AFC/OFF/Bypass circuit.
Was this helpful?
What can we do to improve the information ?