Here’s what more than 2,500 business decision-makers around the world say.Download the report
...with the Facility Hero app in hand! Discover how you can optimize your maintenance efforts today.Learn more
Access tailored services, 24/7 self-service and expert help. Anywhere, anytime, any project.Discover now
Everything you need to know about our IoT technology backbone.Learn more
Explore our global offerings or select your country from one of our five regions.Global
Découvrez nos offres globales ou sélectionnez votre pays dans l’une de nos cinq régions.
How to program an ATV18 drive for 2 wire control and low speed as speed reference?
ATV18, Altivar 18.
Programming and setup.
2 wire control for ATV18 drive will be between LI1 and +24V terminals. A maintained dry contact or a jumper can act as a run command.
Low speed can be used to control the drive locally.
The low speed parameter can be programmed by hitting down arrow key on the drive until LSP is shown.
Once LSP shows up press data and use the up and down arrow keys to adjust setting. Once satisfied with speed press enter to save the setting.