Technical FAQs

Ask a Question

Video: How to replace the integrated display on a PM800 series meter with a PM8D

Issue:
A user needs to replace the integrated display on a PM800 series meter with the PM8D integrated display replacement part.
 
Product Line:
PM800 series meter

Environment:
PM800 series meter repair
 
Cause:
A user is experiencing problems with a PM800 series meter integrated display and they want to know how to replace the integrated display with PM8D.
 
Resolution:
The PM8D will come as a single display as shown in pictures below. 

Front View: 


Back View: 

 
*Warning:  Installation and maintenance of this device should only be performed by qualified, competent personnel that have appropriate training and experience with high voltage and current devices. Failure to follow the instructions / warnings in the Meter Installation Guide can result in permanent damage to the meter, severe injury or death.

Before replacing the display:
  • De-energize the meter (disconnect control power)
  • Disconect line voltage and short out CTs at the installed CT shorting blocks

Below is a video showing how to remove the existing integrated display on a PM800 series meter and replace it with PM8D.

Was this helpful?
What can we do to improve the information ?