Technical FAQs

Ask a Question

ACE969 Multi-Protocol Communication Interface Installation Sheet, Instruction Bulletin (ANSI), 63230-216-235A1, May 2007

Goals and Symptoms

ACE969 Multi-Protocol Communication Interface Installation Sheet, Instruction Bulletin (ANSI), 63230-216-235A1, May 2007
The ACE969 multi-protocol communication interfaces function with Sepam Series 20, 40, or 80. They have two communication ports to connect a Sepam to two independent communication networks:
The S-LAN (Supervisory Local Area Network) port to connect Sepam to a supervision network using one of the three following protocols:
IEC 60870-5-103
DNP3
RTU Modbus
The communication protocol is selected when setting Sepam parameters.
The E-LAN (engineering local area network) port, reserved for Sepam remote parameter setting and operation using the SFT2841 software
There are two versions of the ACE969 interfaces. Each has different S-LAN ports:
ACE969TP (Twisted Pair) is for connecting to an S-LAN network using a two wire RS485 connection
ACE969FO (Fiber Optic) is for connecting to an S-LAN network using a fiber-optic connection (star or ring)
The E-LAN port is always a two-wire RS485 connection.

Facts and Changes

Keywords:
63230216235A1

Causes and Fixes

see attachment


AEDL3

 

  • (Removed Image URL: /PubResEXPORT.nsf/2b87ee90be777fc085257c28006ee4ef/2abb9889a0fa46c1c12573fc00161b0c/fl_block_5/0.2A82?OpenElement&FieldElemFormat=gif)
    Date Created: February 26, 2008
    Last Revised: February 26, 2008
    Public
    Original Author: JJ
    All content © 1992-2008 Schneider Electric

Legacy KB System (APS) Data: RESL191277 V1.0, Originally authored by PhHa on 02/27/2008, Last Edited by PhHa on 02/27/2008
Related ranges: Sepam series 80, Sepam series 40, Sepam series 20, ACE 9XX
Was this helpful?
What can we do to improve the information ?