Technical FAQs

Ask a Question

How to configure the EHC3020 for one shot mode

Goals and Symptoms

How to configure the EHC3020 for one shot.

Facts and Changes

All versions of the Advantys Configuration Software.

Causes and Fixes

Wire the 'EHC3020' to the incremental encoder.

  • Double click on the 'EHC3020' module to open the properties window for the module.

  • Configure the parameters as shown.
· Download the application to the island.

  • Start the PLC.
· Place the PLC into test mode.

  • Set the ‘Input Validation’ bits to ‘Off’.

  • Enable the ‘Counter Synch’

  • Enable the ‘Counter Enable’

To reset the counter, toggle the ‘counter sync’ bit from 0 to 1.

text text

Was this helpful?
What can we do to improve the information ?