Technical FAQs

Ask a Question

What does "TC fault" and "TP phase fault" in a Sepam Series 40 mean ?

"TC faults" and "TP phase faults" relate to Current Transformer Supervision (CTS) and Voltage Transformer Supervision (VTS), which can be set using the advanced UMI or SFT2841 software. When enabled, the Sepam relay will supervise the current and voltage APS_SENSORS and make sure that a phase isn't missing or a fuse isn't blown. The status of the CTS or VTS can be viewed via Modbus using TS indicators.


TC fault = CTS fault
TP Phase fault = VTS fault relating to phase difference between current and voltage
TP Vo fault = VTS fault relating to 3 phase voltage sum (Vr)

AEDL3


Legacy KB System (APS) Data: RESL203147 V1.0, Originally authored by MiZe on 08/20/2010, Last Edited by MiZe on 08/20/2010
Related ranges: Sepam series 40
Was this helpful?
What can we do to improve the information ?